Wire High Frequency Spark Test Machine(GW-066A)
Specifications:
Test Voltage: 1.0~15.0KV. Cable Diameter: 0~25mm. Output Frequency: 2.5-3.5kHz normal. Fast recovery time after fault (0.1s)
The Sine Wave Spark Tester is a fast and reliable instrument used in distinguish wire faults and detecting bare wires. Its high-speed fault detection feature gives you prompt information without worsening the condition of the wire after the test.
The use of high frequency (3kHz) enables a traditional commercial power frequency bead chain electrode to be shortened to 120mm HS015E Model.
The Sine Wave Spark Tester is quality-assured to meet your needs.
Basic Function
Fast recovery time after fault (0.1 second).
Occupies short space in line and with improvement factor of 50 compared to
Traditional CT power frequency electrode.
Voltage Display: 0.0~15.0KV digit, 14.2mm LED display, Accuracy +/- 1% of reading
Output Control: Front Panel Reset in Manual Mode. Closure time is selectable
0.2s/2s/5s in main board by jumper JP, Form C relay contacts (250VAC/5A) for all
Wire faults detected.
Limits the fault current without damaging the test equipment.
Short exposure time to corona does not degrade nor damage good insulation.
Distinguishes all wire faults and detects bare wire.
Safety Switch interlock.
Technical Specifications:
| Specification |
GW-066A Wire High Frequency Spark Test Machine |
| Output Voltage |
0.0~15.0KV R.M.S. |
| Test Voltage |
1.0~15.0KV R.M.S. |
| Cable Diameter |
0~25mm |
| Maximum Load Current |
4mA Resistive,40mA Capacitive |
| Output Frequency |
2.5-3.5KHznormal |
| Electrode lengths |
Bead Chain 120mm |
| Fault Indication |
Indicating lamp,Counting byDigital Counter |
| Output Control |
1 Form C relayContacts(220VAC/5A)forall wire
faults and bare wire faultsdetected |
| Input Control |
SP1, SP2 input interlock control |
| Operating Model |
Extruder ContinuousApplication |
Power Source |
175~264 Volts, 180VA, Single phase, 50/60 Hz |
| Operation Temperature |
+4~45°C |
| Operation Humidity |
<90%RH |
| Signal Cable Lengths |
5M |
| Weight |
Control Unit =5 kgs, Electrode = 8.5 kgs |
| Dimension Controller |
360(L)x485(W)x90(H) mm |
| Gauge Head |
330(L)x200(W)x390(H) |
| Line Speed |
2000 M/min. maximum* |
What about the product quality?
For our products, each instrument must be carried out 100% quality calibration and test when delivery goods. With CE certificate, we are very confident in our products, and we will pack them with safety wooden case to protect the machine when transport oversea.
What about usage of the machine?
We will also give your professional guidance(Product operating manual and video), each products comes with a USB flash drive which have all the details.
What about warranty?
Guarantee one years( if the parts damage within one year, we can replace the part for free)
If customer need any technical support, we can help them solve their problem through email, video meeting. We also can provide door to door service, but customer need to bear the travel fees.
What about standards support?
We are strictly following different international standards such as EN, ISO, ASTM, AATC, JIS, GB ect, and had been recognized by SATRA, CSA international standard agency.
){kind=link}