Suppliers with verified business licenses
Multiple Alternating Bending Seat and Back Tester
•Product Characteristics:
1. Frame type. All cylinder loading assemblies can be adjusted and secured in position along the aluminum alloy profiles of the frame structure.
2. All cylinder loading assemblies utilize an arbor hexagonal non-rotating cylinder to keep the loading pads from rotating for loading. 3.
3. all cylinder loading assemblies can be adjusted to the left, right, forward, backward, and up and down positions to achieve the optimum position according to the testing requirements. 4. all cylinder loading assemblies are pneumatic servo closed-loop loaded.
5. the vertical cylinder assembly is mounted on a free horizontal sliding "base" that automatically translates and stays vertical when subjected to lateral force. 6. Universal foot pad equipment, so that the minimum distance between the equipment from the ground is more than 80 mm, easy to adjust the level of equipment and forklift handling.
7. Simple operation, one person can quickly complete the specimen clamping, without any tools to assist.
•Technical specifications:
| model | GW -BFM -38-02 | GW -BFM -38-03 | ||||
| assembly | 4 sets of loading components (A, B, C, D) | 6 group loading components (A, B, C, D, E, F) | ||||
parameter |
tab | Cylinder specifications | Output force range | installation site | remarks | |
| A&C&E | D80*500-S | 500-2500N | Top face, which is loaded vertically | Load height distance from the platform: 500-1300 mm. | ||
| B&D&F | D63*500-S | 300-1500N | Side, lateral loading | 1. Adjustable inclination angle of 0-90 degrees. 2. Adjustable horizontal loading height of 400-1500 mm. |
||
| 1. Overall dimension: 1540 * 3030 * 2100, weight: 465 kg. 2. Gas source: the air pressure shall be greater than or equal to 0.5MPa; the flow rate is greater than 1200 L / minute; the gas source shall be treated by water filtration and drying.3. Power supply: 220VAC, 50W. |
||||||
control |
1. The system adopts the computer input test parameters, and output or store the test results. 2. Adopt the eight-channel pneumatic closed-loop SCM control system developed by the factory. The test settings are expanded in a rich and beautiful multi-interface, with graphical and curved expression, and all data can be edited twice, or report output. 3. Check the control cylinder output force or displacement test function. With tracking, display force-time curve, each loading section countdown, overload output alarm, etc. 4. Select the individual working mode or some (or all) linkage working mode between all the cylinder loading components. 5. The system has stop / power off memory function, low pressure detection and breakpoint shutdown function. |
|||||
What about the product quality?
For our products, each instrument must be carried out 100% quality calibration and test when delivery goods. With CE certificate, we are very confident in our products, and we will pack them with safety wooden case to protect the machine when transport oversea.
What about usage of the machine?
We will also give your professional guidance(Product operating manual and video), each products comes with a USB flash drive which have all the details.
What about warranty?
Guarantee one years( if the parts damage within one year, we can replace the part for free)
If customer need any technical support, we can help them solve their problem through email, video meeting. We also can provide door to door service, but customer need to bear the travel fees.
What about standards support?
We are strictly following different international standards such as EN, ISO, ASTM, AATC, JIS, GB ect, and had been recognized by SATRA international standard agency.
Suppliers with verified business licenses
){kind=link}
){kind=link}